TOPS TTT-SLIM
TOPS Slim Tuff Tank Stackable Storage Tanks
Brass Inserts, 120 Gallon Tanks
TOPS Slim Tuff Tank Stackable Storage Tanks with Brass Inserts
Customize your Bulk Fluid Storage and Gravity Dispensing System with your choice of high density polyethylene tank configurations and accessories. We don't recommend stacking more than 2 tanks per stand.
Benefits
- Eliminate Hassles of 55 gallon drums:
Messy clutter from drum storage.
Unused product in each ?empty? drum.
Potential contamination from outdoor drum storage.
Down-time moving 55 gallon drums.
Potential injury and workers comp claims from moving awkward drums.
- Buy in Bulk: Reduce your Total Fluid Expenses
A one-time, cost-effective investment will store multiple Class IIIB fluids such as motor oils, lubricants, hydraulic fluids, ATF, Antifreeze, DEF and many other fluids. A refillable bulk storage system also reduces waste from packaged goods.
- Optimize Valuable Shop Space
Our space saving stackable fluid systems can open up valuable floor space to allow for additional revenue producing shop work space or the expansion of the number of service bays.
- Flexibility to Move Fluids throughout Your Shop or Forklift Tanks into Trucks
Convert a stationary system into a portable storage system for point-of-use dispensing with either caster wheels or the addition of a forklift/pallet jack pallet base.
- Secondary Containment
Provides a clean and safe barrier between the tank and the environment for EPA and SPCC Compliance. Primary tanks combined with secondary containment provide a clean, space saving solution to meet SPCC guidelines 40 CFR 264.175 requiring 110% capacity of a single primary tank within the containment.
Optional Accessories:
- Two Valves - 1" MxF, UL Listed, Brass Ball Valve or 1" Brass Spring Release Barrel Valve
- Two Vents - 2" 1 Way Venting Breather Cap or 1" Desiccant Air Breather / Filter
- Stand with 24" legs
- Drip Tray Includes: Drip Tray Holder, 2 Drip Tray Pan Inserts w/ 2 Screens
- 2-Tank Gravity Feed Accessory Package
- Secondary Containment Vessel - 145 Gallon
How to Order:
- Choose your tank quantities
- Choose the type of valve for dispensing your liquid
- Choose the type of vent or filtration of your liquid as it's dispensed
- Choose a stand if desired
- Choose a drip tray if desired. The drip tray mounts to your stand to catch any drips from the valves.
- Choose a Gravity Feed Accessory Package if desired.
- Choose a Containment Vessel if desired for EPA and SPCC Compliance.
Due to the ability to customize your tank package the above images may not reflect your customized system.
Slim Rectangular Stackables
TOPS Slim Tuff Tanks are available 12, gallons. All Slim Tuff Tanks can be stacked with each other without the use of any converting brackets. TOPS Slim Tuff Tanks have been tested by a third party testing laboratory for dynamic compression, internal pressure, and stack test evaluations.
| Gallons | Dimensions | Tank Weight | Model # | Inserts Material |
|---|
| 120 | 54" x 22" x 32" | 44 lbs | 1035500N95401 | Brass |
*Tanks are designed to be placed on our factory designed HD Universal Tank Stand or flat surface.
Features
- Narrow 23" deep footprint - Allows for use in tight spaces along bays or between bays.
- Dispensing outlets on the front and both ends of the tank - Provides versatility for a wide range of installation options.
- When stacked two high, top fill is 84" - Complies with maximum fill height for many oil suppliers.
- Translucent tank with molded-in and inked level markers - Allow for visual level inspection without the need for external site gauges
- Constructed from high density FDA compliant polyethylene resin
- Available wall anchor kits - for added stability and security.
- Optional 25" wide 110% containment - complies with EPA/SPCC.
Why Polyethylene?
- Polyethylene tanks are lower cost than steel or stainless steel lube storage tanks.
- Polyethylene is Lightweight - less than one-half the weight of steel.
- Polyethylene tanks are seamless one-piece construction. No welds to break or leak.
- Polyethylene won?t rust or pit like steel tanks.
- Polyethylene is easy to clean and maintain.
- Polyethylene has Exceptional Impact resistance ? wont dent like steel.
- Polyethylene has Better weatherability ? can be stored outside or in damp areas without rusting.
- Polyethylene is Translucent when molded of natural resin for visible liquid level.
- Polyethylene is Virtually maintenance free ? no repainting.
Note: Know the weight capacity of your support system prior to filling to prevent tank from tipping or stand from collapsing. TOPS Tuff Tanks have been Certified to withstand 10,000 pounds of uniform vertical load. We recommend no loads over 5,000 lbs.
We carry a variety of 1? dispensing valves that fit perfectly with the 1? molded-in brass drain bushing in our tanks.
The Brass Spring Release Barrel Valve keeps safety a #1 priority! The spring-loaded lever will automatically shut off when released. The internal Viton gasket is compatible with most fluids, and keeps post-dispensing drips to a minimum. This valve is made in the United States ? do not confuse with lesser-quality imports!
 The Brass Ball Valve is a heavy duty domestic product as well. 1? MxF input/output minimizes potential leak points. This valve has a PSI rating of 125. Connect an Poly 900 elbow or a Poly straight for a finished valve kit.
Individual accessories to complete your venting needs.
- Desiccant Air Breather
- 2 in. One-Way Air Breather Cap
 Durable, interchangeable components are the backbone of our elite stand system. Our stand base has been created to match our tanks' specific contoured design.
Features:
- Heavy-Duty 7 Gauge Extruded Steel Construction
- Durable, Corrosion-Resistant Powder Coat Finish
- 1-1/2" Diameter Pipe Legs
- Base with 24" legs
- Bolt-On Elbow Kits (sold separately or as a package)
Drip Trays & ComponentsControl your spills, cleanly drain filters, and utilize this additional shelf to hold your fill containers. Our drip tray kit gives you another entire work station! The drip tray frame easily bolts to the front legs of the stand, allowing it to be added at any time - even after the system is set up. Height can be easily adjusted after installation as well. Drip tray insert pans with screens can be ordered individually, or as a complete set. Features: - Drip tray frame is protected with a durable, corrosion-resistant powder coat finish.
- Expanded wire lid is included with all drip tray insert pans.
- Pans are rigid, keeping unexpected spills to a minimum, because they will not flex as they are drained.
- Insert Pan Dimensions: 8”W x 12”L x 4”H
Be sure to order the correct Gravity Feed Package for the quantity of tanks ordered.
Gravity Feed Accessory Packages Include:
- Poly 1" Elbow(s)
- Poly 1" Straight(s)
- 4'x1" Braided Tube(s)
- Hose Clamps
- 1- 2oz. Tube Gasoila Sealant
- Elbow Kit (for stand)
Containment Vessels
Our Vessels are rotationally molded HDPE with vertical rib reinforcement for superior strength and impact resistance.
| Vessel Size | Dimensions | Weight | Model # |
|---|
| 145 Gallon | 74" x 24" x 23" | 58 lbs | 1035600N97801 |
|
1-877-230-2736
Tuff Tank Brochure
